| Industry |
Application |
Method |
Material |
Recommended product |
| Automobile and electrical component |
Welding of body and part |
Lap welding |
High-tensile steel |
ML-6810A |
| Marking on engine part |
Deep engraving |
Aluminum |
ML-7064A ML-7320CL/7340CL |
| Marking on aluminum wheel |
Marking |
Aluminum alloy |
ML-7320CL/7340CL ML-7064A |
| Welding of head light |
Welding of filament |
Tungsten |
ML-2050A ML-2350A |
| Welding of motor coil |
Welding of magnet wire |
Covered copper wire |
MAW-300A/050A MDA-8000B |
| Fusing of motor |
One-stop welding from charging to discharging motors |
Copper wire |
Motor fusing unit IS-444C IS-120B |
| Welding of ECU |
Welding of bus bar |
Copper |
MAW-300A/050A ML-8150A |
| Welding of sensors |
Round seam welding |
Iron, carbon steel, stainless |
ML-6700A ML-2450A |
| Welding of pressure sensor |
Seam welding of sensor foil |
Stainless |
ML-6700A ML-2450A |
| Welding of thermo sensor |
Projection welding |
Stainless |
IS-120B |
| Welding of relay, fuse, connector |
Welding of lead wire to part |
Stainless, copper, brass, nickel |
ML-2050A ML-2350A ML-2650B |
| Welding of harness part |
Welding of wire |
Copper |
ML-8150A |
| Welding of lead wire |
Caulking |
Copper |
MEA-100A |
| Welding of needle bulb |
Welding |
Stainless |
IPB-5000A |
| Welding of terminal |
Welding of terminal and stranded wire |
Copper, brass |
IS-444C |
| Paint removal of plastic button (illuminated switch) |
Paint removal |
Plastic |
ML-7111A ML-7064A ML-7320CL/7340CL |
| Marking on baring |
Code marking |
Iron |
ML-7064A ML-7320CL/7340CL |
| Marking on automobile part |
Code marking |
Iron, aluminum |
ML-7111A ML-7064A ML-7320CL/7340CL |
| Marking on ABS coil |
Code marking |
Iron |
ML-7112AH |
| Deep engraving on engine case |
Code marking |
Aluminum |
ML-7064A ML-7320CL/7340CL |
| Marking on tool |
Black/white marking |
Iron, aluminum |
ML-7064A ML-7320CL/7340CL |
| Electronic device (Cell phone, digital home appliance, etc.) |
Welding and marking of body of digital camera |
Spot welding without drilling, permanent logo marking |
Stainless |
ML-2150A ML-7320CL/7340CL ML-7111A |
| Welding and marking of part of cell phone |
Spot welding without drilling, permanent logo marking |
Aluminum |
ML-2150A ML-7320CL/7340CL ML-7111A |
| Welding of IC part |
Direct welding of substrate of IC device, Soldering |
Copper, iron |
ML-8150A ML-2150A ML-2350A ML-5060A |
| Welding of HDD |
Welding of gimbals |
Stainless |
ML-2050A ML-2350A |
| Welding of connector |
Welding of lead wire |
Brass, copper, nickel |
ML-2350A - 2650B |
| Welding of motor coil |
Welding of magnet wire |
Covered copper wire, copper, copper alloy, phosphor bronze |
MAW-300A/050A |
| Marking and paint removal of key top of PC and cell phone |
Permanent marking and paint removal |
Plastic |
ML-7320CL/7340CL ML-7111A |
| Welding of lead frame |
Lap welding |
Stainless, brass |
MEA-100A |
| Welding of HDD gimbals |
Fine multi-spot welding |
Spring |
ML-2350A ML-6500C |
| Welding of crystal venerator |
Sealing of crystal vibrator |
Stainless |
ML-6500C ML-6700A |
| Welding of wristwatch |
Precision welding of titanium part |
Titanium |
ML-2150A |
| Welding of terminal |
Welding of terminal and stranded wire |
Copper, brass |
IS-444C |
| Welding of motor for camera |
Welding |
Copper |
MDA-4000B |
| Trimming of resistor element |
Removal of unnecessary part |
Platinum, nichrome, oxidized ruthenium |
ML-7111A ML-9001A Laser trimming system |
| Metal sheet |
Welding of body part |
Lap welding of high tensile steel |
High-tensile steel |
ML-6810A |
| Welding of precision metal sheet |
Lap welding of stainless sheet |
Stainless |
ML-6700A ML-6810A |
| LED |
Welding of LED module |
Direct welding |
Copper, Nickel |
ML-2350A |
| Flat panel |
Marking on LCD, PDP glass |
Inner-glass marking of reference number |
Glass |
ML-9001A Laser titler (Inner glass marking type) |
| Welding of back light |
Welding of CCFL |
Stainless, copper |
ML-2350A |
| Thin film removal |
Removal of thin film which is covered on surface of transparent glass substrate |
TCO film |
Laser titler (Coat removal type) |
| Solar battery |
Patterning of thin film photovoltaic substrate |
Scribing of pattern |
Amorphous silicon (a-Si), chemical compound (CIGS), transparent electrode (ITO FTO) |
Thin film laser scribing machine |
| Insulation removal of thin film photovoltaic substrate |
Edge deletion of outer circumference of substrate |
Substrate |
Thin-film edge deletion system |
| Tearing of thin film photovoltaic substrate |
Cutting to make it smaller than photovoltaic cell |
C-Si, Single-crystal silicon, polycrystal silicon |
Cutting system |
| Secondary battery |
Welding of lithium ion battery for mobile |
Spot welding of aluminum case and mixed material part |
Aluminum |
ML-2351A |
| Sealing of battery case |
Square battery case |
Stainless, aluminum |
Laser Sealing System for Square-shaped Battery Case |
| Welding of lithium ion battery |
Spot welding and sealing of battery case |
Aluminum, stainless |
ML-6810A ML-2150A |
| Welding of tab on battery |
Welding |
Iron, nickel |
MDA-8000B |
| Marking on battery case |
2D code marking on aluminum battery case |
Aluminum |
ML-7320CL/7340CL ML-7111A ML-7064A |
| Medical |
Welding of catheter |
Precision fine welding of protective mesh |
Stainless |
ML-6300A ML-6500C |
| Welding of medical equipment |
Welding of part of cardiac electrogram |
Stainless |
MDB-4000B |
| Marking on medical equipment |
Logo marking |
Stainless, etc. |
ML-7320CL/7340CL |
| Round finish of edge of medical wire |
Round finish of edge |
Stainless |
MAW-300A |
| Sealing of both ends of pipe |
Sealing of fine tube |
Titanium |
MAW-050A |
| Marking on implant part |
Serial number marking |
Stainless |
ML-7320CL/7340CL ML-7111A |
| Optical communication |
Welding of optical connector |
Ring projection welding |
Stainless |
ISB-600A |
| Semiconductor |
Marking on silicon wafer |
4/5/6/8 inch sized wafer |
Wafer (Silicon, sapphire, chemical compound) |
Laser wafer marking system |
| Marking on WL-CSP |
8/12 inch (150/200/300mm) sized wafer |
Silicon
|
WL-CSP marking system |
| Marking on IC chip |
Serial number marking |
Plastic |
Laser marking system for IC package ML-7112AH ML-7320CL/7340CL |
| Trimming of chip resistor |
Laser removal of resistance material to adjust resistance value of chip resistance |
Chrome metal |
Laser trimming system |
| Debarry of IC chip part |
Removal of residue from IC package after trimming and forming |
Plastic |
Debarring system for mold plastic package |
| Pipe |
Welding of pipe and cap |
Cap welding of pipe end |
Stainless, aluminum |
MDB-4000B |
