 |
  |
|
 |
||
 |
||
|
|
|
|
||
|
||
Can handle deep etching, black marking, trimming, film peeling, cutting, and scribing at high speed with fine detail.
You can select either a right-angle type or straight type oscillator.
- Environmentally friendly, low electricity consumption. Require no external water cooling system.
- Maintenance free (no need for lamp replacement)
- It is possible to link with a network and CAD data files are supported.
| fθlens | f75 | f100 | f150 | f270 | f350 |
| Processing area (mm) | φ39 | φ80 | φ120 | φ216 | φ200 |
| Marking speed (mm/s)*1 | 0.01 - 5,000 | 0.01 - 7,000 | 0.01 - 10,000 | 0.01 - 18,000 | 0.01 - 20,000 |
| Position resolution(μm)*2 | 1 | 2 | 2 | 4 | 4 |
| Work distance(mm) | 93 | 107 | 170 | 313 | 411 |
| Character height setting range(mm) | 0.1 - 60 | 0.13 - 80 | 0.2 - 120 | 0.36 - 220 | 0.47 - 280 |
*1 The marking speeds are calculated (theoretical values).
*2 The position resolutions are calculated (theoretical values).
| Model | ML-7064A |
| Wavelength | 1,064nm |
| Maximum output | 50W min. (for CW mode) |
| Beam quality | Multi mode |
| Number of schedules | 1,023 |
| Fonts | True Type fonts, DIN, JIS Z 8905, JIS Z 8904, JIS Z 8903, OCR-A, OCR-B, round hand fonts |
| Print types | Letters (uppercase and lowercase), number, katakana, hiragana, kanji, symbols |
| Supported file formats | DXF, BMP, JPEG, GIF, TIFF |
| Bar code types | Code 39, ITF |
| 2D code types | Data matrix, QR codes (square and rectangular) |
| External interfaces | USB 1.1, compact flash (CF), RS-232C (option) |
| Required power | Single-phase 200 VAC +/-10%, 50/60 Hz |
| Cooling method | Chiller cooled |
| Display units | Operation unit and PC |
Notes: Data Matrix and QR codes are products (and registered trademark) of ID Matrix Corporation (US) and Denso Wave. Ltd., respectively.
The specification and external design are subject to change without notice.
Bit map marking
Deep etching marking of a stainless steel rod
 |
 |
 |
 |
 |
