 |
  |
|
 |
||
 |
||
|
|
|
|
||
|
||
The operation unit uses interactive communications, which makes real-time processing possible.
* Large-screen 7.7-inch LCD touch panel
* As few as four touches from layout selection to the start of marking
* Layout image display
* Status display that shows the operation status
This is a visible-light laser with a wavelength of 532nm (green light), half that of the fundamental wave laser (1,064nm).
| fθ lens | f100 | f160 | f254 | f300 |
| Processing area(mm) | φ80 | φ100 | φ150 | φ175 |
| Marking speed(mm/s)*１ | 0.01 - 7,000 | 0.01 - 11,000 | 0.01 - 17,000 | 0.01 - 20,000 |
| Position resolution(μm)*2 | 2 | 2 | 3 | 4 |
| Work distance(mm) | 95 | 175 | 282 | 328 |
| Character height setting range(mm) | 0.13 - 80 | 0.21 - 130 | 0.34 - 210 | 0.4 - 240 |
*1 The marking speeds are calculated (theoretical values).
*2 The position resolutions are calculated (theoretical values).
SHG can mark silicon wafers, WLCSP, thin memory cards, thin ICs, etc. without damaging the internal device.
| Model | ML-9001A |
| Wavelength | 532nm |
| Maximum output | 5W |
| Beam quality | Single mode |
| Required power | Single-phase 100 to 240 VAC -10%+6%, 50/60 Hz |
| Display units | Operation unit and PC |
| Compatible OSS | Windows XP / Windows 2000 |
| 2D codes | Data matrix, QR codes |
The specification and external design are subject to change without notice.
Marking on glass inner surface
Peeling insulation from wire
 |
 |
 |
 |
 |
